Loading Events

« All Events

Tedori-Callinan Lecture: “Isogeometric Analysis”

October 1 at 10:30 AM - 12:00 PM

The vision of Isogeometric Analysis was first presented in a paper published October 1, 2005 [1].  Since then it has become a focus of research within both the fields of Finite Element Analysis (FEA) and Computer Aided Design (CAD) and is rapidly becoming a mainstream analysis methodology and a new paradigm for geometric design [2].  The key concept utilized in the technical approach is the development of a new foundation for FEA, based on rich geometric descriptions originating in CAD, resulting in a single geometric model that serves as a basis for both design and analysis.

In this overview, I will describe some areas in which progress has been made in developing improved methodologies to efficiently solve problems that have been at the very least difficult, if not impossible, within traditional FEA.  I will also describe current areas of intense activity and areas where problems remain open, representing both challenges and opportunities for future research (see, e.g., [3,4]).

REFERENCES

[1]  T.J.R. Hughes, J.A. Cottrell and Y. Bazilevs, Isogeometric Analysis: CAD, Finite Elements, NURBS, Exact Geometry and Mesh Refinement, Computer Methods in Applied Mechanics and Engineering, 194, (2005) 4135-4195.

[2]  J.A. Cottrell, T.J.R. Hughes and Y. Bazilevs, Isogeometric Analysis: Toward Integration of CAD and FEA, Wiley, Chichester, U.K., 2009.

[3]  Special Issue on Isogeometric Analysis, (eds. T.J.R. Hughes, J.T. Oden and M. Papadrakakis), Computer Methods in Applied Mechanics and Engineering, 284, (1 February 2015), 1-1182.

[4]  Special Issue on Isogeometric Analysis: Progress and Challenges, (eds. T.J.R. Hughes, J.T. Oden and M. Papadrakakis), Computer Methods in Applied Mechanics and Engineering, 316, (1 April 2017), 1-1270.

Thomas J.R. Hughes

Peter O’Donnell Jr. Chair in Computational and Applied Mathematics, and Professor of Aerospace Engineering and Engineering Mechanics, University of Texas at Austin

Dr. Hughes holds B.E. and M.E. degrees in Mechanical Engineering from Pratt Institute and an M.S. in Mathematics and Ph.D. in Engineering Science from the University of California at Berkeley. He taught at Berkeley, Caltech and Stanford before joining the University of Texas at Austin. At Stanford he served as Chairman of the Division of Applied Mechanics, Chairman of the Department of Mechanical Engineering, Chairman of the Division of Mechanics and Computation, and held the Mary and Gordon Crary Family Chair of Engineering.

He is co-editor of the international journal Computer Methods in Applied Mechanics and Engineering, a founder and past President of USACM and IACM, past Chairman of the Applied Mechanics Division of ASME, and past Chairman of the U.S. National Committee on Theoretical and Applied Mechanics (USNC/TAM).

Dr. Hughes is an elected member of the U.S. National Academy of Sciences, the U.S. National Academy of Engineering, the American Academy of Arts and Sciences, and the Academy of Medicine, Engineering and Science of Texas, and a Foreign Member of the Royal Society of London, the Austrian Academy of Sciences (Section for Mathematics and the Physical Sciences), and the Istituto Lombardo Accademia di Scienze e Lettere (Mathematics Section).

Dr. Hughes is one of the most widely cited authors in Engineering Science. He has been elected to Distinguished Member, ASCE’s highest honor, and has received ASME’s highest honor, the ASME Medal. He has also received the Huber Prize and Von Karman Medal from ASCE, the Timoshenko, Worcester Reed Warner, and Melville Medals from ASME, the Von Neumann Medal from USACM, the Gauss-Newton Medal from IACM, the SIAM/ACM Prize in Computational Engineering Science, and many other national and international awards.

Dr. Hughes has received honorary doctorates from the Université catholique de Louvain, the University of Pavia, the University of Padua, the Norwegian University of Science and Technology (Trondheim), Northwestern University (Evanston), and the University of A Coruña.

The Special Achievement Award for Young Investigators in Applied Mechanics is an award given annually by the Applied Mechanics Division of ASME. In 2008 this award was renamed the Thomas J.R. Hughes Young Investigator Award.

In 2012 the Computational Fluid Mechanics Award of the United States Association for Computational Mechanics was renamed the Thomas J.R. Hughes Medal.

Dr. Hughes has delivered multiple plenary lectures at World Congresses of Computational Mechanics and United States National Congresses of Computational Mechanics. He also has been a plenary lecturer at the International Congress of Mathematicians.

Details

Date:
October 1
Time:
10:30 AM - 12:00 PM
Event Tags:
, ,

Organizer

Mechanical Engineering and Applied Mechanics
Phone:
215-746-1818
Email:
meam@seas.upenn.edu
Website:
http://www.me.upenn.edu/

Venue

Wu and Chen Auditorium (Room 101), Levine Hall
3330 Walnut Street
Philadelphia, PA 19104 United States
+ Google Map
Website:
https://www.facilities.upenn.edu/maps/locations/levine-hall-melvin-and-claire-weiss-tech-house